Ashford Adjusting Knob
Ashford Adjusting Knob
Canadian shipping only

For adjusting the drive band tension of the Traditional and Traveller spinning wheels.

PRODUCT of NEW ZEALAND

$8.00 Add to cart
Ashford Brake Band Set with Springs
Ashford Brake Band Set with Springs
Canadian shipping only

Ashford nylon break band with two tension springs. Ashford always recommends using two springs on the brake band tie-up.

PRODUCT of NEW ZEALAND

$5.00 Add to cart
Ashford Finishing Wax Polish – 75g
Ashford Finishing Wax Polish – 75g
Canadian Shipping only.

Preserve, protect, and enhance wheels, looms, and all your craft accessories with this quick and easy-to-apply environmentally-friendly, low-gloss finishing wax polish.

Made from beeswax and tree oils, it is ideal for the new natural timber or for rejuvinating and restoring loved and lacquered products. Apply with a soft rag, steel wool, or Scotchbrite pad, then buff to a deep rich lustrous finish with a soft cloth. No other finish is required. Non-flammable, non-toxic. 75 gram tub.

PRODUCT of NEW ZEALAND

$19.00 Add to cart
Ashford Flexible Conrod Joint
Ashford Flexible Conrod Joint
Replacement connecting joint between the conrod and treadle rail used on Ashford wheels made since the mid 1980s. Clear polycord. Over time these turn sort of yellow and get brittle. One of the most common replacement parts we sell.

This may or may not fit other brands of wheels, it might be the wrong diameter or be too long, which you can change by cutting some off with a very sharp knife. Approximately 7cm long.

PRODUCT of NEW ZEALAND

$3.50 Add to cart
Ashford Flyer Bearing Standard Set
Ashford Flyer Bearing Standard Set
Canadian shipping only

Includes both the front and rear Maiden Upright bearings for use with the standard flyers on all Ashford wheels. The Jumbo Flyer bearings are larger.

The front has a 1/2" hole, the rear the 1/4" hook. Sturdy black nylon.

PRODUCT of NEW ZEALAND

$5.00 Add to cart
Placeholder
Ashford Jumbo Maiden Upright Bearing – 3/4″ hole
Canadian shipping only

JUMBO Maiden Upright "bearing", with a 3/4" hole. Black plastic. This is for the various JUMBO kits.

PRODUCT of NEW ZEALAND

$5.00 Add to cart
Ashford Leather Conrod Joiner
Ashford Leather Conrod Joiner
Replacement connecting joint between the conrod and treadle rail used on spinning wheels prior to the mid 1980s.

PRODUCT of NEW ZEALAND

$5.50 Add to cart
Ashford Spinning Wheel Oil 15ml
Ashford Spinning Wheel Oil 15ml
Price per 15 ml bottle. Canadian shipping only

Fine-grade oil for spinning wheels of all kinds. Now comes in a small plastic bottle with a special needle-type dispenser and cap, which directs the oil much better than the old style bottle. "For quiet, effortless spinning. Non-staining high grade oil."

PRODUCT of NEW ZEALAND

$13.50 Add to cart
Belt Shuttle for Inkle Weaving
Belt Shuttle for Inkle Weaving
Canadian Shipping only.

18 cm (7") belt shuttle for Inkle weaving. Made from Silver Beech.

PRODUCT of NEW ZEALAND

$19.00 Add to cart
Placeholder
Drive Belt – Joy 2
Canadian Shipping only.

Replacement drive belt for the Joy 2 Spinning Wheel. 1370mm circumference, 3.2mm polycord. DOES NOT FIT THE original JOY 1 WHEEL.

PRODUCT of NEW ZEALAND

$21.00 Add to cart
The Fibre Garden
Lendrum Drive Band – Large/Plying
This drive band is specifically for the Lendrum Plying Head setup. It is larger in diameter than the Regular drive band. Clear polycord.

PRODUCT of CANADA

$10.00 Add to cart
The Fibre Garden
Lendrum Footman Connector Set – Double Treadle
A set of two rubbery connectors that go between the treadle and footman on Lendrum DOUBLE TREADLE Wheels.

PRODUCT of CANADA

$7.00 Add to cart
Louet Bobbin Bearing – 6mm Standard
Louet Bobbin Bearing – 6mm Standard
Black plastic round bearing for all Louet wheel bobbins, EXCEPT for Victoria/Julia. 6mm hole. If it seems loose, use glue to seal in place.

PRODUCT of HOLLAND

$4.00 Add to cart
Louet Bobbin Bearing – 8mm Victoria/Julia
Louet Bobbin Bearing – 8mm Victoria/Julia
Black plastic round bearing for Louet Victoria/Julia wheel bobbins. 8mm hole. If it seems loose, use glue to seal in place. The 6mm version is pictured here but they look almost identical.

PRODUCT of HOLLAND

$4.00 Add to cart
Louet Drive Belt – Standard
Louet Drive Belt – Standard

Flexible polyurethane drive belt. This belt fits most Louet wheels except the S90, S40, S45 and Victoria S95/96. There is a separate drive belt for each of these wheels. Louet part number 1.280. Diameter is 163cm.

PRODUCT of HOLLAND

$22.00 Add to cart
Louet Drive Belt – Victoria Wheel
Louet Drive Belt – Victoria Wheel

Flexible polyurethane drive belt. This drive belt fits the only the Victoria S95/96.

PRODUCT of HOLLAND

$22.00 Add to cart
Louet Footman to Treadle Connector – Standard
Louet Footman to Treadle Connector – Standard
Louet Part # 17.1105

The Footman to treadle connector attaches the treadle to the footman. It is a part that is commonly needing to be replaced on Louet wheels. This fits all S10, S15, S17, S51, S70, S71, S75, S76, S77, S20 and S60 wheels. The S90 takes a slightly different connector.

PRODUCT of HOLLAND

$20.00 Add to cart
Louet Scotch Tension Brake Set – Vict/Julia
Louet Scotch Tension Brake Set – Vict/Julia
CUSTOM ORDER PRODUCT: please allow 2 to 4 weeks for delivery. Available quantities show to allow our shopping cart to accept orders and do not reflect our on-hand inventory.

Complete scotch tension brake set for the Victoria and Julia Spinning Wheels. Parts include: Spring, Nylon Cord and Black Knob.

PRODUCT of HOLLAND

$27.50 Add to cart