accessories
Showing 19–36 of 61 results
Lendrum Bobbin – Regular
The regular bobbin that comes with all Lendrum Spinning Wheels, single and double treadle.
PRODUCT of CANADA
Lendrum Bobbin Bushing – Regular
White plastic bushing, which goes in each end of the Regular Lendrum Bobbins. Probably best to be glued into place.
PRODUCT of CANADA
Lendrum Drive Band – Large/Plying
This drive band is specifically for the Lendrum Plying Head setup. It is larger in diameter than the Regular drive band. Clear polycord.
PRODUCT of CANADA
Lendrum Drive Band – Regular
This drive band is specifically for the Lendrum Regular Head setup. It is smaller in diameter than the Plying drive band. Clear polycord.
PRODUCT of CANADA
Lendrum Fast Flyer
A fast flyer for spinning shorter fibres, or for lace spinning. Not as fast as the Very Fast Head, but still plenty fast. The Regular Bobbins fit this, as well as the High-Speed Bobbins. 3-speed whorl. Ratios: 12:1, 15:1, 17:1.
PRODUCT of CANADA
Lendrum Footman Connector – Single Treadle
The rubbery connector that goes between the treadle and footman on Lendrum SINGLE TREADLE Wheels. Includes a screw and plastic cap thingy.
PRODUCT of CANADA
Lendrum Footman Connector Set – Double Treadle
A set of two rubbery connectors that go between the treadle and footman on Lendrum DOUBLE TREADLE Wheels.
PRODUCT of CANADA
Lendrum Footman Upgrade Kit
This upgrade kit is only for older Lendrum Single Treadle wheels with a cable connecting the treadle to the drive wheel. Newer wheels do not requite this conversion.
Includes a wooden footman, a gizmo that attaches to the treadle with a rubbery footman connector in between. Basic instructions are provided.
PRODUCT of CANADA
Lendrum Plying Head
For the single or double-treadle Lendrum folding wheels. Does not fit on the Saxony.
With larger bobbins than the Regular Head, these are designed for plying together two full Regular Bobbins worth of yarn. Comes with one Plying Bobbin, Plying Drive Band, wider Plying Flyer. Orifice diameter is 7/8-inch, suitable for thicker yarns/art yarns.
Lacquered maple finish. Ratios possible are 5:1, 7:1, 9:1
PRODUCT of CANADA
Lendrum Quill Head
For the single or double-treadle Lendrum folding wheels. Does not fit on the Saxony.
The long 9-inch steel quill allows for you to spin off the tip, especially useful for spinning cotton and other short fibres that require high twist.
Lacquered maple finish. Ratios possible are 6:1, 25:1, 37:1
PRODUCT of CANADA
Lendrum Regular Flyer
This is the all-purpose regular flyer that comes standard with any of the Lendrum folding wheels. Holds the regular bobbins but is too narrow for the larger plying bobbins. Bobbin not included. 3-speed whorl. Ratios: 6:1, 8:1, 10:1.
PRODUCT of CANADA
Lendrum Sliding Thread Guide – Regular
Sliding Hook Thread Guide that fits the Lendrum Regular Flyers. A larger one for the Plying head is available by special order.
PRODUCT of CANADA
Lendrum Tension Knob
A replacement wooden tension knob for all Lendrum wheels. Lacquered finish..
PRODUCT of CANADA
Lendrum Tensioned Lazy Kate
CANADIAN ORDERS ONLY.
A tensioned Lazy Kate, this holds three regular Lendrum bobbins for your plying needs.
PRODUCT of CANADA
Lendrum Threading Hook
The special hook for pulling fibre through the flyer orifice on Lendrum wheels. Lacquered wood handle with a metal hook. Likely fits many other brands of wheels as well.
PRODUCT of CANADA
Lendrum Very Fast Flyer Head
Free ground shipping in Canada by Expedited Parcel Post. Canadian orders only.
A super-fast flyer head for spinning short fibres in particular, things like cotton, yak, camel and other things where high speed is essential. Includes the spinning head, flyer, threading hook and high-speed bobbin. The high-speed bobbins fit both this flyer and the regular Fast Flyer.
Ratios possible are 26:1, 30:1, 36:1, 44:1
PRODUCT of CANADA
Louet Footman to Wheel Connector – Standard
Black plastic round part that connects the top of the footman to the wheel axle. Standard on all Louet Irish tension wheels, possibly on the rest as well.
Louet part number SR0108
PRODUCT of HOLLAND
Majacraft Bobbin, Wood – Baby
Canadian shipping only. Majacraft's new wooden Baby Bobbin is made using laser-cut bamboo ply with 3d printed rings and fibreglass tubes. The new design minimizes the sound made by the tension string in the bobbin groove and allows you to see your yarn as you spin, through the cutout ends. All the new Majacraft bobbins will now work on the Aura wheel. Launched in late 2020.
This bobbin is designed for use on the Lace Flyer as a plying bobbin, and will hold two full bobbins of singles spun on the lace bobbins. Alternatively, it can be used as a high-volume high-speed bobbin.
PRODUCT of NEW ZEALAND