Majacraft Lavender Oil Wax Polish – 15g
Canadian orders only.
Beautifully scented lavender wood polish, used to keep your spinning wheel and accessories as beautiful as the day they arrived. A small amount goes a long way. Lavender polish is great to keep in your little bag of spinning tools.
PRODUCT of NEW ZEALAND
1 in stock
Majacraft Bobbin, Wood – Jumbo
The Jumbo or Plying bobbin has an exceptionally large capacity and can be used in conjuction with a plying flyer or wild flyer -- they don't fit on the regular standard flyer. They will contain up to two standard bobbins of yarn when plying or will allow you to spin longer yarns when using it with a Wild Flyer. As of spring 2011, all Jumbo bobbins have the two extra guide holes at one end so they fit on the Aura wheel.
Majacraft wooden bobbins offer stylish design and innovative technology for the discerning fibre artist. The Tawa bobbin ends and fibreglass core make for a very distincive bobbin. They have pressed polymer bearings that provide extremely smooth spinning and excellent durability. Each is individually hand turned by their skilled wood turners and will beautifully compliment your Majacraft spinning wheel.
PRODUCT of NEW ZEALAND
Hackle, Majacraft – 2 row 320mm
Double pitch hackle from Majacraft, 320 mm (12.6") comb width. The combs have stainless steel pins with polished points that are blunt enough to be much more pleasant to use and sharp enough to do the job well. Fibres are lashed on to the teeth and then pulled through a diz to prepare them into top for spinning. They can be used in much the same way as wool combs, for either preparing a single type of fibre, blending colours or blending a mixture of fibres.
Instead of drilling the hackle base, Majacraft has developed a new technique of bonding the pins in with a very tough resin. The pins are positioned perfectly straight and perfectly even on every hackle.
This is the double row version, and we can order in the single row as well, just inquire for current pricing and availability. It includes a wooden pin cover to protect you and the hackle when it is not in use. Also included are special Majacraft clamps. The clamp block is drilled at an angle and has a solid rubber top to ensure that the hackle is held firmly on your table and the rubber will prevent damage to the table. The clamps allow you to secure the hackle to a sturdy surface and carry out colour blending in conjunction with a diz. The hackle is also stepped at the end to provide an area to use an 'F' clamp if you prefer this to the included clamps.
The hackle dimensions are:
length, 470mm (18.5 inches)
width, 45mm (1.8 inches)
height, 35mm (1.4 inches)
comb width, 320mm (12.6 inches)
The double row hackle is great for finer fibres. The pins are at different heights so initial combing can be done on the higher pins before carrying out fine combing with both rows of pins. As is often the case, the time spent in preparation is taken from the time spent in spinning later.