Majacraft Bobbin, Wood – Stylus
Canadian shipping only. Price per bobbin.
The Stylus bobbins can be purchased individually to go with your Majacraft Stylus Kit. While smaller and shorter than any of their other bobbins, these will hold a huge amount of yarn compared to traditional quill type spinning.
Majacraft wooden bobbins offer stylish design and innovative technology for the discerning fibre artist. The Bamboo bobbin ends and fibreglass core make for a very distincive bobbin. They have pressed polymer bearings that provide extremely smooth spinning and excellent durability. Each is individually hand turned by their skilled wood turners and will beautifully compliment your Majacraft spinning wheel.
PRODUCT of NEW ZEALAND
1 in stock
Majacraft Lavender Oil Wax Polish – 15g
Beautifully scented lavender wood polish, used to keep your spinning wheel and accessories as beautiful as the day they arrived. A small amount goes a long way. Lavender polish is great to keep in your little bag of spinning tools.
PRODUCT of NEW ZEALAND
Hackle, Majacraft – 2 row 320mm
Double pitch hackle from Majacraft, 320 mm (12.6") comb width. The combs have stainless steel pins with polished points that are blunt enough to be much more pleasant to use and sharp enough to do the job well. Fibres are lashed on to the teeth and then pulled through a diz to prepare them into top for spinning. They can be used in much the same way as wool combs, for either preparing a single type of fibre, blending colours or blending a mixture of fibres.
Instead of drilling the hackle base, Majacraft has developed a new technique of bonding the pins in with a very tough resin. The pins are positioned perfectly straight and perfectly even on every hackle.
This is the double row version, and we can order in the single row as well, just inquire for current pricing and availability. It includes a wooden pin cover to protect you and the hackle when it is not in use. Also included are special Majacraft clamps. The clamp block is drilled at an angle and has a solid rubber top to ensure that the hackle is held firmly on your table and the rubber will prevent damage to the table. The clamps allow you to secure the hackle to a sturdy surface and carry out colour blending in conjunction with a diz. The hackle is also stepped at the end to provide an area to use an 'F' clamp if you prefer this to the included clamps.
The hackle dimensions are:
length, 470mm (18.5 inches)
width, 45mm (1.8 inches)
height, 35mm (1.4 inches)
comb width, 320mm (12.6 inches)
The double row hackle is great for finer fibres. The pins are at different heights so initial combing can be done on the higher pins before carrying out fine combing with both rows of pins. As is often the case, the time spent in preparation is taken from the time spent in spinning later.
Majacraft Flyer – Aura Hybrid
Feb/2012 - Majacraft has just announced they are making the new Aura wheel flyer available. This strange-looking beast will fit all the wheel models, and uses the wooden jumbo bobbins that most of us have with the plying kit. It does NOT matter if your jumbo bobbins are the new ones with the two holes. That's important for the Aura wheel but the flyer works perfectly fine with the older version of jumbo bobbins.
In Majacraft's words: "The flyer is all new and builds on the advances Majacraft has made in the past. It shares the aerodynamic shape of our other flyers for efficient and easy spinning. Most importantly it has a new dual function orifice. Fine yarns can be held still in the delta part of the orifice. This also has the function of holding coil yarns very still so you can observe your work. You can bypass the delta and use the large halo ring for spinning huge."
If you splurge and get this flyer, you're going to need a couple of jumbo bobbins if you plan to ply.
NOTE: LITTLE GEM WHEELS require the special Little Gem Mini Tension Knob with any of Majacraft's wide flyers, including the Aura, Plying or Wild flyers. That's because the standard tension knob sticks out too far and gets in the way of the wider flyer arms. It's listed here below the various flyers and flyer kits. We usually keep it in stock.
Majacraft Rose Spinning Wheel
Price includes the wheel, four standard plastic bobbins, normal and fast whorl, two different flyers and the Rose Carrier (holds 3 bobbins and can be used as a travel Lazy Kate, also stores the spare whorl and allen key).
The Rose is a classic wheel for every spinner. With its spoked wheel and engraved rose motif, it is elegant with a traditional feel. Some of the features of the Rose are:
- double treadle
- quick change flyer
- sealed bearings, so no oiling required
- sliding flyer hook
- the Rose uses the dependable scotch tension for smooth and easy spinning
- New Zealand Rimu hardwood construction
- includes the Rose Carrier which can be used as a 3-bobbin lazy kate. The carrier has rubber feet, a convenient carry handle, whorl holding pin and a magnet to store the whorl allen key
- has a normal (Rose) and fast whorl (Little Gem), two flyers: The Majacraft Standard Delta, and the Fine Fibre Orifice with ceramic insert for smooth takeup
- ratios extend from 4.25 to 19.5 using the whorls supplied
- the handle folds to allow easy handling
- the handle and head position are adjustable so you can achieve the most comfortable spinning position
- suits both left and right handed spinners
- compatible bobbins and flyers with Majacraft wheels & accessories
Please click this link for the Majacraft wheel ratios
DROP SHIPPING: for Canadian destinations not serviced by Canada Post Expedited GROUND shipping, it may be possible for us to have the wheel shipped from New Zealand at the price listed here. Please inquire.
PRODUCT of NEW ZEALAND