The Fibre Garden : crimson
Showing all 4 results
crimson
Brazilwood, Extract
Sawdust or extract from a tropical tree, Caesalpinia punctata. This species is from southeast Asia and is not the endangered species native to Brazil but still produces good, rich colours. It is also called Sappanwood or Eastern Brazilwood.
Use on protein or cellulose fibres. Best with a premordant. A classic dye that gives rich crimson, purple or pink, depending on the mordant. Brazilwood is very generous and, although expensive, a dyebath can yield up to 7 or 8 successive dips. Have plenty of fibre prepared, soaked and ready! Light and washfastness is rated as average.
SAWDUST: Use at 20-100% WOF for medium to strong shades. Soak in water and/or rubbing alcohol for a few hours. Spread on a tray to air overnight. Add to water and simmer 1 hour. Cool and strain. Observe dyebath colour. If it leans towards scarlet-orange, stir in a teaspoon of Soda Ash to push the pH higher and change the dyebath to more of a purple-red. Add small amounts of Soda Ash until this happens. Enter premordanted fibre to dye liquor and simmer 1 hour.
EXTRACT: Approximately 6 times stronger than sawdust or chips. Use at 20-50% WOF for medium to strong shades. Dissolve in hot tap water and add to dyepot. Adjust pH with Soda Ash as outlined above. Enter premordanted fibre to dye liquor and simmer 1 hour.
Brazilwood, Sawdust
Sawdust or extract from a tropical tree, Caesalpinia punctata. This species is from southeast Asia and is not the endangered species native to Brazil but still produces good, rich colours. It is also called Sappanwood or Eastern Brazilwood.
Use on protein or cellulose fibres. Best with a premordant. A classic dye that gives rich crimson, purple or pink, depending on the mordant. Brazilwood is very generous and, although expensive, a dyebath can yield up to 7 or 8 successive dips. Have plenty of fibre prepared, soaked and ready! Light and washfastness is rated as average.
SAWDUST: Use at 20-100% WOF for medium to strong shades. Soak in water and/or rubbing alcohol for a few hours. Spread on a tray to air overnight. Add to water and simmer 1 hour. Cool and strain. Observe dyebath colour. If it leans towards scarlet-orange, stir in a teaspoon of Soda Ash to push the pH higher and change the dyebath to more of a purple-red. Add small amounts of Soda Ash until this happens. Enter premordanted fibre to dye liquor and simmer 1 hour.
EXTRACT: Approximately 6 times stronger than sawdust or chips. Use at 20-50% WOF for medium to strong shades. Dissolve in hot tap water and add to dyepot. Adjust pH with Soda Ash as outlined above. Enter premordanted fibre to dye liquor and simmer 1 hour.
Lac, Powdered Extract
Powdered extract from resin produced by the Lac bug, a scale insect that is also the source of natural shellac, native to southern Asia.
Best on protein fibres. Lac produces red, crimson and burgundy tones similar to Cochineal but warmer. No mordant is required although they will extend the colour range. Use at 15-20% WOF for medium shades.
TO USE: soak overnight in cold water with 5% Cream of Tartar to WOF. Simmer 15 minutes, cool and strain. Add more water if necessary then enter the fibre and simmer for 45 minutes. The dyebath will yield several more dips in softer shades.
Light/washfastness: excellent.
Munjeet, Ground
Ground dried roots of Rubia cordifolia, also called Indian Madder. A very close cousin to regular Madder.
Use on protein or cellulose fibres. Pre-mordanting recommended. Produces dramatic reds, crimson and coral/salmon. Basically follow a recipe for regular Madder. Use at 50-100% WOF for medium shades.
TO USE: simmer in water below 185°F for 30 minutes. Cool overnight, then repeat simmer and strain. Add more water and enter pre-mordanted fibre. Hold below 158°F for one hour. Higher temperatures produce browns.
Light and washfastness: excellent