The Fibre Garden : Accessories Spares & Repairs
Showing 1–18 of 19 results
Doo-dads for your Louet wheel will be found here. All kinds of accessories as well as fix-its.
Accessories Spares & Repairs
Louet Art Yarn Flyer – Irish Tension
The Art Yarn Flyer was launched in 2013. It has a huge 7/8-inch orifice. This will fit on Louet Irish Tension wheels including the S10, S15, S17, S51, S70, S71.S75,S76, & S77 wheels. The Bulky Bobbin is recommended to work with this flyer. The bobbin is not included, this is the flyer only.
PRODUCT of HOLLAND
Louet Bobbin Bearing – 6mm Standard
Black plastic round bearing for all Louet Irish Tension wheel bobbins, 6mm hole. If it seems loose, use glue to seal in place. Not for Victoria/Julia bobbins.
PRODUCT of HOLLAND
Louet Bobbin Bearing – 8mm Victoria/Julia
Black plastic round bearing for Louet Victoria/Julia wheel bobbins. 8mm hole. If it seems loose, use glue to seal in place. The 6mm version is pictured here but they look almost identical.
PRODUCT of HOLLAND
Louet Bulky Bobbin – Irish Tension
Price per bobbin. For Louet IRISH TENSION wheels.
The bulky bobbin was designed to hold bulky yarns. If your intentions are to spin novelty yarns on a regular basis, this is the bobbin for you. The bobbin will hold 250-400 gr of yarn and its ratios are 6.2:1, 5:1, and 4.2:1. To use the bulky bobbin, you will need the wide flyer as well. The Bulky bobbin is clear lacquered and will fit on all current and discontinued Louet Irish Tension wheels EXCEPT: S40, S45, Victoria, S87, S90.
PRODUCT of HOLLAND
Louet Drive Belt – Standard
Flexible black polyurethane drive belt. This belt fits most Louet wheels except the S90, S40, S45 and Victoria S95/96. There is a separate drive belt for each of these wheels. Louet part number SR0115. Diameter is 163cm.
PRODUCT of HOLLAND
Louet Drive Belt – Victoria Wheel
Flexible polyurethane drive belt. This drive belt fits the only the Victoria S95/96.
PRODUCT of HOLLAND
Louet Footman to Treadle Connector – Standard
Louet Part # SR0112
The Footman to treadle connector attaches the treadle to the footman. It is a part that is commonly needing to be replaced on Louet wheels. This fits all S10, S15, S17, S51, S70, S71, S75, S76, S77, S20 and S60 wheels. The S90 takes a slightly different connector as does the Victoria
PRODUCT of HOLLAND
Louet Footman to Wheel Connector – Standard
Black plastic round part that connects the top of the footman to the wheel axle. Standard on all Louet Irish tension wheels, possibly on the rest as well.
Louet part number SR0108
PRODUCT of HOLLAND
Louet High Speed Bobbin – Irish Tension
Price per bobbin.
This high speed bobbin is clear lacquered to match the finish of the S10, S10DT and S51, S51DT. This bobbin has been carefully crafted to make spinning at high speeds a breeze. The bobbin has a sheave with three settings on one end to obtain three different spinning speeds. The ratios are: 6.5:1, 9.5:1 and 15:1. The high speed bobbin is meant to be used with the Louet High-Speed Flyer, and will fit on all current and discontinued Louet Irish Tension wheels EXCEPT: S40, S45, Victoria, S87, S90. Louet product number 1.330
PRODUCT of HOLLAND
Louet High Speed Bobbin – Scotch Tension – Pre-order only
A PRE-ORDER ONLY PRODUCT, please allow 2 to 4 weeks for delivery. Available quantities show to allow our shopping cart to accept orders and do not reflect our on-hand inventory.
High speed bobbin for the Victoria and Julia wheels. Scotch Tension.
PRODUCT of HOLLAND
Louet High Speed Flyer – Irish Tension
This high speed flyer with a sliding hook is specially designed for spinning very fine yarns. It is 4 inches wide and has a 3/8 inch orifice. For Louet bobbin-lead (Irish tension) wheels. Lacquered finish. High speed bobbin not included.
PRODUCT of HOLLAND
Louet High Speed Set Scotch Tension – Beech – Pre-order only
A PRE-ORDER ONLY PRODUCT, please allow 2 to 4 weeks for delivery. Available quantities show to allow our shopping cart to accept orders and do not reflect our on-hand inventory. FREE GROUND SHIPPING within Canada. Canadian orders only.
This Scotch Tension high speed set for the Victoria or Julia contains a flyer, 3 bobbins, a small whorl (you have to add this to the existing whorl) and a hook for threading the yarn through the orifice and the flyer hole. The orifice is 5 mm, but you can take out the inserts and have an 8 or 12 mm orifice. Ratios are 1:20 and 1:30.
PRODUCT of HOLLAND
Louet High Speed Set Scotch Tension – Oak – Pre-order only
A PRE-ORDER ONLY PRODUCT, please allow 2 to 4 weeks for delivery. Available quantities show to allow our shopping cart to accept orders and do not reflect our on-hand inventory. FREE GROUND SHIPPING within Canada. Canadian orders only.
This high speed set for the Victoria or Julia contains a flyer, 3 bobbins, a small whorl (you have to add this to the existing whorl) and a hook for threading the yarn through the orifice and the flyer hole. The orifice is 5 mm, but you can take out the inserts and have an 8 or 12 mm orifice. Ratios are 1:20 and 1:30. The photo is of the beech set, but in the oak set the flyer disc and the hook handle are oak.
PRODUCT of HOLLAND
Louet Lazy Kate – Stand-alone – Pre-order only
A PRE-ORDER ONLY PRODUCT, please allow 2 to 4 weeks for delivery. Available quantities show to allow our shopping cart to accept orders and do not reflect our on-hand inventory. FREE GROUND SHIPPING within Canada. Canadian orders only.
This stand-alone Lazy Kate will hold 4 standard Louet bobbins and is tensioned to provide some braking, preventing bobbins from over-spinning while plying. Only 3 Bulky Bobbins will fit on this Lazy Kate and 4 Standard bobbins (both Irish and Scotch tension). Bobbins are NOT INCLUDED.
PRODUCT of HOLLAND
Louet Lazy Kate Metal Rack – Irish Tension
Metal rack for onboard Lazy Kate, holds two bobbins. Fits all Irish Tension (Bobbin lead) Louet wheels. Single treadle wheels have a built in holder for the rack. If you have a Double Treadle wheel, you need to order a wooden bar to hold this Lazy Kate.
PRODUCT of HOLLAND
Louet Sliding Flyer Hook – Standard
These are replacement sliding hooks for the Victoria or Julia flyers as well as the regular flyers for most other wheels.
PRODUCT of HOLLAND
Louet Stand Alone Skeinwinder – Pre-order only
A PRE-ORDER ONLY PRODUCT, please allow 2 to 4 weeks for delivery. Available quantities show to allow our shopping cart to accept orders and do not reflect our on-hand inventory. FREE GROUND SHIPPING within Canada. Canadian orders only.
Louet's stand alone skein winder allows a user to clamp a skein winder to a table to be used with any brand or type of spinning wheel. This convenient skein winder folds for easy storage. Skein circumference: 52" (132cm). Constructed of Beech wood.
PRODUCT of HOLLAND
Louet Standard Bobbin Beech – Scotch Tension – Victoria/Julia
Scotch Tension standard unfinished beech bobbin for the S95/96 Victoria or S11 Julia spinning wheel. The bobbin has a sheave with three settings on one end to obtain three different spinning speeds. Ratio Range 6:1 to 12:1.
PRODUCT of HOLLAND